Basic Info.
Product Description
Performance Brief
Operating weight(without ripper): 16500KGS
Ground pressure (at operating weight) 55.23kpa
Min. Ground clearance 445mm
Length of track on ground 2386mm
Grade ability: 30~25
Straight
Side
Diesel Engine
Model ------------------ C6121 (CAT Licensed 3306 diesel engine)
Type ------------------ Water-Cooled, single-row, vertical, 4-stroke-cycle, Turbo-charged
Number of cylinders-bore*stroke 6-121*152mm
Rated engine speed 1900rpm
Flywheel power(at 1900rpm) 119kw/160HP
Starting 24V starter motor
Fuel system Direct injection with individual adjust system free injection pumps and valve
Transmission
Power shift
Planetary power shift with high-torque-capacity oil clutched, special valve permits fast speed and direction changes. Three speeds forward, three reverse.
Single- stage torque converter with output torque divider combined smoothness with economy. Connected to transmission by double universal joint for removal. Oil-to-air and oil-to-water heat exchangers cool the torque converter oil.
Gear Forward Speed ( Km/h) Reverse Speed (Km/h)
1 4.0 4.8
2 6.9 8.4
3 10.9 12.9
Steering & Brake
Hydraulically actuated, multiple-disc oil clutches require no adjustment. Oil-cooled, hydraulically-boosted contracting band brakes. Hand levers combine steering clutch disengagement and braking in one control. Brake pedals are retained for operators who prefer them. Mechanical parking brake.
Track Roller Frame
Reinforced, box-section construction. Out-mounted carrier rollers. Lifetime lubricated rollers and idlers. Adjustable, 2 positions idler.
Number of rollers (each side) 7
Final Drives
Crown-shaven, double-reduction final drives. Floating ring seals. Sprocket with bolt-on. Replaceable rim segments.
Sealed and Lubricated Track
Sealed and lubricated track surrounds the track pin with lubricant to greatly reduce internal bushing wear. Lubricant is held in place by a dealing arrangement consisting of a polyurethane seal, a rubber load ring and a thrust ring. Hydraulic track adjusters and two-piece master link standard.
with of standard shoe 560mm
Track gauge 1880mm
Hydraulic Controls
Four optional systems are available, complete system consists of pump, tank, filters, valves, linkage and control levers anticavitation valve is included with bulldozer controls. System available are as following:
One valve (internal) for bulldozer position: Raise, hold, lower, float.
Two valve (both internal) for bulldozer and tilt cylinder tilt cylinder position: Tilt lift, tilt right, hold
Two valve (one internal, one external) for bulldozer and ripper, ripper position: Raise, lower, hold.
Three valve (two internal, one external) for bulldozer, tilt cylinder and ripper.
Service refill capacities
Fuel tack: 295 liters
Cooling system: 38 liters
Diesel engine crankcase: 27.4 liters
Transmission, bevel gear and steering clutch compartments: 98 liters
Final drives (each): 18.9 liters
Specifications For Blades
Blade type Width Height Digging Depth. Ground clearance Max. Tilt
Straight 3297mm 1130mm 592mm 910mm 810mm
Angled 3890mm 910mm 444mm 910mm 330mm
Address:
Huanyuan Lionkin Bldg., No. 29 Haichun (West) Rd, Yancheng, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Company Introduction:
Jiangsu Lionkin Industrial Co., Ltd. (LIONKIN) was new established on the base of our old company of Yancheng Foreign Trade Corp. Ltd. (YCFT), the registered capital of 10 million yuan, we are the oldest Imp & Exp Company in Yancheng Jiangsu Province, we start international business from Year 1990, we export Agricultural Machinery, Construction Machinery, Wind Generators, Hardwares, Crafts, and so on, our yearly amount is about one (1) billion US Dollars each year, Now the new LIONKIN company expends its business of machinery processing, constructions, green energy equipments, ect. More powerfull company will supply you much more better safety business. Welcome all freinds from all over the world.